Healthcraft SnapToggle Bolt

SKU: 220-235
You can earn 3 Ocelco Cash Reward Points on this product!
Price: $2.64
Healthcraft SnapToggle Bolt
Healthcraft SnapToggle Bolt
Product Details
HealthCraft grab bars are compatible with SNAPTOGGLE bolt that mount directly behind drywall, tile or other surfaces to provide adequate reinforcement to the wall.
 
The SNAPTOGGLE bolt gets their name from their speed and ease of use—they work in a SNAP!
 
Ideal for Heavy Loads in Hollow Walls, Ceilings & Floors.
 
SNAPTOGGLE bolts pre-install without a bolt and can be installed with a screw gun. This allows one-person installations (instead of two), saving time and money. It's like having an extra pair of hands.
 
Cost-effective, Turn a 2-person job into a 1-person job and get the job done faster. Save six minutes per anchor compared with old-fashioned methods.
 
SNAPTOGGLE bolt always result in the lowest possible installation cost! Strongest toggle bolt in smallest hole
 
Features
Convenient
Allow removal of bolt or fixture without anchor falling behind wall.
Most reliable
Will not damage or break through wall even when vibrated.
Easy to Use
Pre-install without bolt.
Accurate
Rugged pre-installation mechanism centers metal channel in small hole, before bolt insertion— and bolt won't sag.
Quick
Can be used with a screw gun—anchor won't spin in hole.
 
Installation Instruction
(for demonstration purposes only - please refer to SNAPTOGGLE bolt instructions for full instructions.
 
Step 1
Drill 1/2" (Ø13mm) hole. Hold metal channel flat alongside plastic straps and slide channel through hole. Minimum clearance behind wall: 1 7/8" (48mm).
 
 
Step 2
Hold ends of straps between thumb and forefinger and pull toward you until channel rests flush behind wall. Slide plastic cap along straps with other hand until flange of cap is flush with wall.
 
 
Step 3
Snap straps at wall by pushing side to side, snapping off straps level with flange of cap.
 
 
Step 4
Place item over flange. Insert bolt through item and tighten until flush against item, then stop.
 
 
 Holding strength of all TOGGLER BRAND anchors varies directly with the strength of the wall material, the screw size, and the extent of the screw engagement.
 
Any recommended anchor is used at your own discretion and risk. Because of variations in screws and substrate materials beyond Mechanical Plastics Corp.'s control, it cannot guarantee the use of any anchor
Product Reviews
Rated: Empty Star Empty Star Empty Star Empty Star Empty Star
Rate this product:  1   2   3   4   5 

"Reliable"

on 4/15/2020 3:01:36 AM

Empty Star Empty Star Empty Star Empty Star Empty Star

My Review: It is holding up my heavy drapery rod very well.