Maximize your budget. Don’t lose money by paying too much for Hill-Rom Circuit Board Controls or repairs. Minimize your maintenance. Our refurbished Hill-Rom bed controls look, operate and are warrantied like brand new, but cost much, much less!
Our repair, test and board refurbishing process
› Incoming Identification & Tracking: Each incoming board is tagged for customer identification, tracking and process quality control.
› Aqueous Cleaning: Boards are thoroughly cleaned via our Closed Loop Aqueous PCB Cleaning System. All dirt, contaminants & soldering flux residues that may affect components and/or circuit operation are removed.
› Visual Inspection: Boards are visually inspected for loose, missing or damaged components.
› Superior Electrical Testing UNDER FULL MOTOR LOAD: All PC Board functions are electrically tested using actual Hill-Rom bed motors as loads for proper performance. All defective components are identified & replaced.
› Comprehensive Bed Function Testing: All bed functions are tested including Trendelenburg, Auto Contour, Limit of Travel and Lockout.
› Comprehensive Electrical Leakage Testing: All Motor Control Circuits are tested for electrical leakage and any "leaking" Triacs are replaced. *This step insures long-term reliable operation through the replacement of control elements that have been previously damaged by electrical surges but are still functioning. Such devices can overheat and cause self-runs to occur.
› Replace & Upgrade Triacs: Replacement Triacs are rated at 600 Volts versus existing 400 Volt devices installed originally. Our newly installed 600 Volt Triacs insure reliable long-life board operation.
› Switch Re-lubrication: All mechanical lockout switches are re-lubricated for smooth travel and reliable operation.
› Static Dissipative Packaging: Boards are individually packaged in static dissipative bags to prevent damage from static electricity and to insure cleanliness in storage prior to use.
Quick Turn-Around Time – Replacement Boards In Stock
ONE YEAR WARRANTY Complete Board
If you choose to exchange your board, you will be billed for a reconditioned board and then credited the difference when your board is received by us. Keep all tracking information from your shipment to us. We are not liable for items sent by the customer and lost in transit.
Hill-Rom is a registered trademark of Hill-Rom Company, Inc.